毫米波雷达及其对抗

介绍毫米波雷达的工作原理及其在海战场上的用途和特点,对毫米波雷达在海战场上的发展现状和发展趋势进行了分析,并就海战场毫米波制导雷达的对抗方法进行了概述。     

信息化时代武器装备电磁兼容技术发展趋势

在C4ISR系统EMC和防护,EMC“预测分析法”设计与控制,电磁环境效应(E3)验证与评估及防护技术,频谱管理,以及EMC新技术、新材料、新器件开发应用等五个方面论述当前EMC技术的发展趋势。     

提高舰载箔条干扰效果的措施研究

分析了反舰导弹对水面舰艇的攻击过程和水面舰艇运用箔条干扰对抗反舰导弹的三种方式，从技术和战术角度研究了提高舰载箔条干扰效果的措施。     

基于故障模式、影响及危害度分析(FMECA)的地铁车辆检修工艺优化方法

提出了一种地铁车辆检修工艺优化方法。该方法采用FMECA(故障模式、影响及危害度分析),对地铁车辆运营过程中的故障数据进行分析,并根据分析结果对当前的地铁车辆检修工艺进行优化,以提高检修作业的合理性和效率。以地铁车辆高压供电系统为例,说明了该优化方法在地铁车辆高压供电系统上的实施流程;结合相关标准的规定建立了定量化的地铁车辆设备危害性风险评价矩阵,用以确定故障模式的可接受程度;通过建立可接受程度与该检修项点检修等级的对应关系,最终得到检修工艺的优化方案。     

基坑开挖引起复合地基下卧双线地铁隧道附加荷载的计算研究

为研究基坑开挖时复合地基及竖向、横向"双洞效应"对下卧双线地铁隧道竖向、横向附加荷载的影响,基于Mindlin应力解,得到在复合地基侧摩阻力作用下隧道轴线上的竖向、横向附加荷载,通过迭代法计算得到"双洞效应"引起隧道轴线上的竖向、横向附加荷载,借助竖向、横向总附加荷载引起的隧道位移对比验证,并分析隧道位置改变对侧摩阻力和"双洞效应"引起隧道竖向、横向附加荷载的影响。研究结果表明:侧摩阻力和"双洞效应"对隧道竖向、横向附加荷载的影响是不可忽略的,其影响主要表现为减小隧道的竖向、横向总附加荷载,且影响范围不变;在施工条件和规范容许范围内,应尽量减小双线隧道之间的距离,以及增大隧道与基坑中点的距离;当需要严谨精确地计算小净距地铁隧道"双洞效应"引起的附加荷载时,必须选用迭代法计算。     

进口汽车零部件监测数据风险分析与模型建立

通过对我国近两年进口汽车零部件现状进行分析,结合汽车零部件召回相关数据,提出进口汽车零部件质量安全风险监测要点。通过层次分析法和失效模式与效应分析法两种方法建立风险评估数据模型,并对比模型结果,对各种进口汽车零部件风险预警等级进行分类,针对分类等级提出相应的风险监管建议,包括风险管理、完善信息平台和及时更新相关技术标准等,探索风险监测管理模式,建立系统的风险识别和评估的触发机制研究,提升我国进口汽车零部件的质量安全风险管理水平。     

Estimation of origin-destination matrices from link counts and sporadic routing data

Estimation of origin-destination (OD) matrices from link count data is a challenging problem because of the highly indeterminate relationship between the observations and the latent route flows. Conversely, estimation is straightforward if we observe the path taken by each vehicle. We consider an intermediate problem of increasing practical importance, in which link count data is supplemented by routing information for a fraction of vehicles on the network. We develop a statistical model for these combined data sources and derive some tractable normal approximations thereof. We examine likelihood-based inference for these normal models under the assumption that the probability of vehicle tracking is known. We show that the likelihood theory can be non-standard because of boundary effects, and provide conditions under which such irregular behaviour will be observed in practice. For regular cases we outline connections with existing generalised least squares methods. We then consider estimation of OD matrices under estimated and/or misspecified models for the probability of vehicle tracking. Theoretical developments are complemented by simulation experiments and an illustrative example using a section of road network from the English city of Leicester.     

Protective effect of polymer coating on the circular steel plate response to near-field underwater explosions

To understand the intrinsic strong interaction between the soft coating and near-field underwater explosion, a series of comparative live fire tests are implemented. Nine steel circular plates with three configurations (i.e. rubber coated plate, foam coated plate and bare plate) are tested using 1.5 g PETN detonator. The stand-off between the plate center and explosive charge is ranged from 3.41 to 1.14 times of the maximum bubble radius. The transient strain history of the plate and acceleration history of the metal base fixture are monitored. The whole explosion process including local cavitation and bubble motion is recorded by an APX-RS high speed camera. Test results show that the compressibility of coating layer is the dominative factor that controls its protective performance in the shock wave loading phase. The more compressible foam coating distinctly reduce the shock wave intensity by local cavitation before enters the densification phase, while the explosion bubble shape and even the direction of water jet can also be changed. But the attenuation performance in the bubble loading phase is not as optimistic as that in the shock wave phase because more deformation space is required while the core has often entered the densification phase.     

硬岩顶管卡滞原因分析及脱困技术研究

针对长距离岩石地层顶管施工中预制管卡滞工程难题,结合观景口水利工程2#无压洞工程,通过资料查阅、案例调研、专家咨询等方法,对多种处理方案进行对比分析。结合工程实践,提出预制管受困点判别方法,并研究制定出沉渣冲洗清理及预制管拆除方案;结合顶管施工特点就如何预防预制管卡滞提出针对性改进措施。经工程验证,所采取方案与技术措施顺利解决了预制管卡滞难题,并确保了后期工程的顺利进行,既缩短了工期又取得了良好的经济效益.,可为类似工程提供借鉴和参考。     

Bottleneck congestion and distribution of work start times: The economics of staggered work hours revisited

Since the seminal work of Henderson (Henderson, J.V., 1981. The economics of staggered work hours. Journal of Urban Economics 9 (3), 349–364), a number of studies have examined the effect of staggered work hours by analyzing models of work start time choice that consider the trade-off between negative congestion externalities and positive production externalities. However, these studies employed flow congestion models to describe traffic congestion. This study develops a model of work start time choice with bottleneck congestion and discloses the intrinsic properties of the model. To this end, this study extends Henderson’s model to incorporate bottleneck congestion. By utilizing the properties of a potential game, we characterize equilibrium and optimal distributions of work start times. We also show that Pigouvian tax/subsidy policies generally yield multiple equilibria and that the first-best optimum must be a stable equilibrium under Pigouvian policies, whereas the second-best optimum in which policymakers cannot eliminate queuing congestion can be unstable.